NETGEAR FS750T2EU network switch Managed Black

FS750T2 - ProSafe™ 48 Port 10/100 Smart Switch + 2 Gigabit Ports
  • Security policy (edit with module Customer reassurance) Security policy (edit with module Customer reassurance)
  • Delivery policy (edit with module Customer reassurance) Delivery policy (edit with module Customer reassurance)
  • Return policy (edit with module Customer reassurance) Return policy (edit with module Customer reassurance)
High Port Density, Gigabit Capability, and Easy Browser-based Management NETGEAR has packed a lot of value into this high density switch. Start with high port density in a one unit box, add two gigabit uplinks to give an added edge to any growing business, then add key switch management capabilities and you have a powerful switch that costs a lot less than you'd expect. Forty-eight 10/100 Mbps ports and two copper Gigabit Ethernet ports connect to servers or a Gigabit-speed backbone for a non-stop, always available 10/100/1000-enabled network that can quickly deliver large multimedia, image, and video files. All 50 shielded RJ-45 ports automatically negotiate to the highest speed and support Auto Uplink™ technology to make the right link. Two hot-swappable Small Form-factor Pluggable (SFP)** GBIC slots provide optional fiber connectivity for greater distance. In addition, an intuitive, Web-browser interface offers the simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritization. Alternatively, use SNMP-based software to manage your Smart Switch.*** Shipped ready for use straight out of the box, it delivers switching that's easy to set up and use. NETGEAR ProSafe Smart Switches are ideal for adding basic management to your unmanaged networks and extending your managed networks. Powerful Forty-eight 10/100 ports and two Gigabit ports deliver non-blocking, full-speed packet forwarding from the edge of your network to the core. Two SFP GBIC fiber slots provide optional fiber connectivity for greater distance. Intelligent Smart Switch capability enables the most key management features for the price of an unmanaged switch. Included are performance monitoring, port configuration, VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization. Right Sized Ideal for growing businesses who want the benefits of management without the cost and complexity of a managed network. Well Designed LEDs located on the front panel make switch status easy to observe and troubleshooting easy to accomplish. Made to last, this durable switch is housed in a 17-inch metal box and comes with a rack mounting kit.
Netgear

Data sheet

MPN
FS750T2EU
Port mirroring
Yes
Link aggregation
Yes
Spanning tree protocol
Yes
10G support
No
Quality of Service (QoS) support
Yes
DHCP features
DHCP client
Certification
FCC, CE
Supported data transfer rates
10/100 Mbit/s
Flow control support
Yes
AC input voltage
100 - 240 V
Maximum data transfer rate
1 Gbit/s
Bandwidth
13.6 Gbit/s
AC input frequency
50 - 60 Hz
Management protocols
SNMP
Networking standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Power over Ethernet (PoE)
No
Firmware upgradeable
Yes
Packet buffer memory
0.128 MB
Power consumption (typical)
21 W
Mean time between failures (MTBF)
59880 h
Switch type
Managed
DHCP client
Yes
Weight
3.2 kg
Depth
205 mm
Height
43 mm
Gigabit Ethernet (copper) ports quantity
2
Copper ethernet cabling technology
1000BASE-T, 100BASE-TX, 10BASE-T
Full duplex
Yes
Dimensions (WxDxH)
440 x 205 x 43 mm
Width
440 mm
SFP/SFP+ slots quantity
2
SFP module slots quantity
2
Web-based management
Yes
Storage relative humidity (H-H)
95
Storage temperature (T-T)
-20 - 70 °C
Operating temperature (T-T)
0 - 40 °C
MAC address table
8000 entries
Colour of product
Zwart
Basic switching RJ-45 Ethernet ports quantity
48